MakerBot Digitizer Manual de usuario descargar pdf (Pagina 42)

SCANNING 101

Sometimes one scan isn’t enough to capture all of an object’s important features. For those

times, there’s MakerBot MultiScan™ Technology, which allows you to combine multiple

scans of the same object.

Here’s how it works:

1. First scan your object. Scan it in its

tallest position ﬁrst, so that any

unwanted data you crop won’t

cut o pieces of later scans.

2. When the scan is complete, crop

out any unwanted data at the top or

bottom of your scan. Scans added

with MultiScan Technology will only

scan within the cropped area.

3. Click and drag in the viewport to examine your raw scan data and ﬁgure out which

areas need more or better data. Rotate your object on the turntable to expose those

areas to the camera.

4. Click Start MultiScan to begin a new scan. MakerWare for Digitizer will gather the new

set of scan data, combine it with the scan data you already have, and create a new

mesh. You can add as many additional scans as you need, but two or three are usually

enough, and additional scans could reduce surface quality.

MultiScan™ Technology

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

Sin comentarios

MakerBot Digitizer Manual de usuario Pagina 42